Dynamic Digital Signage Hardware & Networking Software – Digital Signage LCD
Home   Sitemap View Cart
Call Us           
1-888-483-2418
 


 
Stretch your monitor among four DVI or VGA screens without the use of software (Model: STRETCHER)
Home » Video Wall Solutions » Video Wall Solutions (Hardware/Software) » Stretch your monitor among four DVI or VGA screens without the use of software (Model: STRETCHER)
 
 
Stretch your monitor among four DVI or VGA screens without the use of software (Model: STRETCHER)
 
 
Availability :Contact us for availability.
Email to Friend
Printable VersionGet a Quote
 
 
Product Overview
 
Features:
  • 2 x 2 VGA Display Wall Controller.
  • The UXST4 accepts analog or DVI VGA video input.
  • Outputs to 4 displays. Each Display shows 1/4 of the VGA image. (2 x 2 format)
  • The UXST4 supports both analog and DVI displays.
  • A stand alone unit that requires no software or other hardware to be installed on your machine.
  • Multiple units can be used for larger wall configurations.
  •  
    Application
     
    This feature is particularly useful for display walls using LCD panels, allowing each panel of a 2 x 2 wall to be mounted in a different orientation. Many LCD panels have larger borders on two of the panel edges, by changing the orientation the minimum gap between displays can be achieved.

    Adjustable Output Refresh Rate
    The UXST4 provides the user with selectable output refresh rates supporting 50. 56, 60, 70, 72, 75 and 85Hz.

    Display Adjustments
    When using an analog VGA source, the VQS01 provides user adjustment for the following:
    - Horizontal Position - Vertical Position - Phase - Clock

    These adjustments allow the output display to line up exactly with the incoming analog VGA source. Adjustments to any particular display mode may be saved, the UXST4 will then recall the settings every time the display mode is detected.

    Gen-Lock
    When using multiple UXST4 cvontrollers for larger wall configurations, it may be desireable to gen-lock the UXST4 units enabling all displays to be synchronised. The UXST4 provides a sync output and sync input , to gen-lock, connect the output from one unit to the input of the next.
     
    Product specification
     
    Specifications:
    Physical Dimensions 248 x 175 x 55mm
    Operating Temperature Range 0 -35 DegC
    Power Requirements 9 -15V DC at 3 amps (max). Requires PSU. (External PSU)
    Cooling The unit contains a cooling fan. The input and output vents should not be restricted.
    VGA Input 1 x DVI connector. Analog or digital
    Display outputs 4 x DVI connectors Analog or digital
    Gen-Lock input/output 2 x RCA connectors. TTL voltage levels
    Power connector 5 pin DIN
    PSU
    PSU Physical Dimensions 132 x 58 x 30mm
    Input power 110 -240v AC 50-60Hz
    Operating Temperature Range 0 -35 degrees C
    Output power 12V DC at 3.75 amps (max)
     
    Diagram
    This is an example of what a setup would look like.
    Product Application Diagram