| | | | | | | | Product Overview | | |
Features & Applications |
The VEEMUX® SM-nXm-AV-LCD audio/video matrix
switch routes audio and video input from many computers to multiple
displays (projectors, monitors, etc.) and speakers. This switch can
drive standard VGA cables, thus eliminating the need for external
interfaces and coax cable connections via BNC connectors.
Signals from a range of input sources can be distributed to various
output devices. A single computer video output can be routed to one
or more monitors. Each video output is buffered from each input,
ensuring signal integrity throughout the system. When switching
ports, the audio automatically mutes until the video has been
synchronized. The audio can also be muted on command.
- Configure and control the switch through Ethernet, serial
port or front panel buttons.
- Equipped with Liquid Crystal Display (LCD) and RS232
Control.
- Switch VGA video directly.
|
- Each output provides one video signal and one stereo audio
signal.
- Each input can be independently connected to any or all
outputs.
- Video bandwidth is 200 MHz or greater.
- Supports 1920x1200 video resolution at a refresh rate of 85
Hz.
- Crestron® compatible.
The VEEMUX switch is the ideal solution for any application where
information from many computers is being presented, such as:
- Classrooms.
- Boardrooms.
- Trade shows.
- Conference and entertainment facilities.
- Courtrooms.
- Command centers.
- Control rooms.
|
| | | | Product specification | | |
Specifications
|
Video Input
- Eight Female 15-pin HD connectors.
- Impedance: 75 Ohms.
Video Output
- Two Female 15-pin HD connectors.
- 1920x1200 video resolution with no degradation.
- Impedance: 75 Ohms.
- Bandwidth: 200 Mhz, fully loaded.
Audio Input
- Eight 3.5mm stereo audio jacks.
- Impedance: 10k Ohm.
- Maximum Input Level: 1 Vrms or 2.5Vp-p.
Audio Output
- Two 3.5mm stereo audio jacks.
- Drives 8-Ohm speakers.
- Unbalanced Gain: user defined.
- Frequency Response: 20 Hz to 20 kHz, +/-0.5 dB.
- Total Harmonic Distortion + Noise: 0.01% at 1kHz.
- Gain Adjustment: -20 dB to +10 dB in 2 dB steps.
- 200 mW RMS of continuous power per output.
- When switching ports, audio mutes until video has been
synchronized.
Regulatory Approvals
|
Cables
- Interface cables between the computers and the switch are
required for proper operation.
- Recommended NTI video cables:
- VGA interface cable (VEXT-xx-MM).
- VGA to BNC cable (VINT-5B-6).
- Recommended NTI audio cables:
- Cables not included.
Power
- 110 or 220 VAC at 50 or 60 Hz.
- Power consumption: 35W
MTBF
Environmental
- Operating temperature: 32°F to 100°F (0°C to 38°C)
- Storage temperature: -20°F to 140°F (-30°C to 60°C)
- Operating and Storage Relative Humidity: 17 to 90%
non-condensing RH.
Warranty
|
| |
|
 |
 |
|
| | |
| | | | | | | |
| NTI:SM-8X2-AV-LCD 8 in 2 out, 200 MHz, RGBHV VGA video + stereo audio, Ethernet control | |  | |
|
|
