| | | | | | | | Product Overview | | |
| The LOPH1210-Kit-LED is a 12.1" sunlight readable LCD module. The module consists of a ChiMei G121X1-L01 TFT color LCD panel and a VHB (very high brightness) LED backlight. At the full brightness setting, the LCD screen lumiannce can reach 1,600 Cd/m2 (nits). At this level, the total backlight power consumption is only 13Watts, which is about half the power required of a CCFL backlight at the same screen brightness. With 1,600 nits screen brightness, the display is highly readable under bright ambient lighting, including direct outdoor sunlight. Also, the ChiMei G121X1-L01 is an industrial LCD with an extremely wide operating temperature range, from -30 to +70oC, making this LCD module specifically suitable for demanding outdoor applications. |
| |
| Specifications: |
| |
| Parameters |
Typical Value |
Units |
Conditions |
| |
|
|
|
| LCD Screen Luminance |
1,600 |
Cd/m2 |
LCD in OFF state (normally White) |
| Luminance Uniformity |
20% or better |
|
(Note 3) |
| Backlight Power Consumption |
13 |
Watts |
Total power to the LED driver board |
| Screen Luminance Dimming Ratio |
500:1 |
|
With LD200 LED driver board |
| Typical LCD Contrast Ratio |
750:1 |
|
White vs. Black (measured in the dark along the normal direction) |
| Typical Viewing Angles |
| 3:00 directions |
80 |
Degrees |
Contrast ratio ≥ 10 |
| 9:00 direction |
80 |
Degrees |
Contrast ratio ≥ 10 |
| 6:00 direction |
80 |
Degrees |
Contrast ratio ≥ 10 |
| 12:00 direction |
80 |
Degrees |
Contrast ratio ≥ 10 |
| LCD Screen Chromaticity (x, y) |
| White |
(0.298, 0.328) |
|
Measured at the normal direction |
| Red |
(0.557, 0.371) |
|
Measured at the normal direction |
| Green |
(0.331, 0.543) |
|
Measured at the normal direction |
| Blue |
(0.145, 0.111) |
|
Measured at the normal direction |
| Response Speed |
|
|
|
| Rise time |
6 |
msec |
White to Black, 10% - 90% transition |
| Fall time |
17 |
msec |
Black to White, 10% - 90% transition |
| LCD Module Weight |
850 |
Grams |
|
|
| |
Note 1: Please refer to ChiMei G121X1-L01 LCD Specification for detailed electrical specifications and general precautions.
Note 2: All data is measured at 25o C ± 2oC ambient temperature.
Note 3: Uniformity = (Lmax - Lmin) / (Lmax + Lmin) where Lmax (Lmin) is the maximum (minimum) luminance measured using a 10
mm diameter meter aperture over the LCD active area, except the last 10 mm area from the edges. |
| |
| | |
| |
| | | | | | | |
| 12.1" highbrightness 1500 nit LCD kit w/LED backlight (bulk w/video controller & inverter) **Open Frame kit without Rear housing** (Model: LOPH1210-Kit-LED) | |  | |
|
|
